Accueil > Vaporizer > Desktop vaporizer > Vaporizer Sublimator Vaporizer – 30cm Stainless Steel Dabmaster KIT XLR 2.0 – Electric Vaporizer

Vaporizer Sublimator Vaporizer – 30cm Stainless Steel Dabmaster KIT XLR 2.0 – Electric Vaporizer

By buying this product you can collect up to 4109 loyalty points. Your cart will total 4109 loyalty points that can be converted into a voucher of 32,87 €.


sublvapo855

657,50 € tax incl.

New product

Here is the last vaporization concept, the atomization of the vapor to maximize the absorption of the active ingredients by your body.

The Sublimator Vaporizer is the top of the desktop vaporizers for those who like efficiency and huge puffs.

A sublime render of flavors and multiplied effects thanks to the Sublimator’s concept.

More details

Add to wishlist

The Sublimator Vaporizer kit includes:

-The heating element in stainless steel

-An atomizer 14-18mm

-A base made of black anodised aluminium.

-Two screens

-A temperature controller

All of that with French outlets.
A kit ready to be used and compatible with dry plants, resins and concentrates.

 

The vaporizer Sublimator can be distinguished of the other vaporizers by its vapor’s atomization process.

Indeed, the plants are heated by the hot air which transforms the active ingredients in gas. Classical principle until now.

The principle of atomization happens next, the vapor is passing through an atomizer which heats the vapor again and multiplies its volume by dividing the vapor’s droplet.

Then you will obtain bigger puffs with a same dose, moreover you will draw more active ingredients with only one inhalation because the droplets of vapor are thinner.

This desktop vaporizer is mainly for expert vapers and amateurs of strong or even stronger sensations.

If you like soft puffs and long lasting sessions, this vaporizer is not for you.

An unmatched extraction of the active ingredients and preservation of the flavors among all the vaporizers.

This vaporizer is perfect for a total and fast extraction of the active ingredients.

A top vaporizer for medical use in phytotherapy, which requires a fast and efficient relief.

 

The Sublimator is available in 3 different models:

-The Sublimator Original Kit = for dry plants / resins

-The Sublimator Nail Kit = for butane extraction like concentrates.

-The Sublimator Dabmaster kit = for dry plants / resins AND butane extraction like concentrates.

The Dabmaster kit is the one we advise you the most because for a difference of a few euros you will be 100% equipped and be able to vaporize any kind of product.

“After vaporization, sublimation!”

Or rather atomization like it was described above.

Indeed, sublimation can be described as a change of phase from solid to gas without letting any solid particles. However with the vaporizer Sublimator, you will have solid material, BUT all the active ingredients will have been sublimed (just like with any good vaporizer).

The originality of the Sublimator is in its capacity to extract all the active ingredients in only one puff and with the atomization of the vapor allowing a better absorption of the active ingredients.

This also allows a render of flavors very well managed because the flavonoids are not damaged little by little just like with most of the vaporizer but in one time

To conclude, the Sublimator Vaporizer extract the aromas and the active ingredients of the aromatherapy plants and the medicinal herbs with the power of a Bong.

On this vaporizer the control of the temperature is made via a box offering 12 levels of temperature and ensure you that there will be 0 combustion.

The Sublimator is provided with a stem allowing you to put water inside it if you want.

Be careful, as it is delivered, the Sublimator is not compatible with every Bong.

Some safety instructions before any use:

You have to be really cautious and be careful to not burn yourself with the heating element, and of course to not to leave within the range of children

The heating time of the Sublimator is around 10 minutes.

Instruction manual for the vaporizer Sublimator:

IMPORTANT:

The heating source in the Sublimator is extremely hot!

A wrong use of this vaporizer can result in a fire and / or heavy injuries. Do not let any material fall inside the Sublimator. Disconnect the cord before cleaning it, to avoid an electric shock

Do not expose the Sublimator to humidity. If the Sublimator comes into contact with water it will be damaged or emit smoke. If that is the case, disconnect immediately the Sublimator and cease to use it.

Don’t follow these instructions or modify them will cause a cancelling of the guarantees. By no means will the company Sublimator be held responsible for the injuries or loss of property during the good or wrong manipulation of this product. This product is only intended for aromatherapy and therapeutic purposes.

Check a healthcare specialist to get pieces of advice.

We found these useful pieces of advice to start with your new Sublimator:

-Grind your plants until you obtain a medium/ thin consistency, we advise you to use a grinder.

-Clean meticulously the bottom section containing the bowl and the atomizer with isopropyl alcohol (ISO) to take off all the possible remaining particles of your new vaporizer Sublimator.

-Place the screen on the top part of the bowl, which is thinner and looks like a cone, it has to be put at the top of the cone.

-Place the Dabmaster heat injector at the top of the cone, put those two parts together on the stand of the Sublimator, and don’t forget to let a 10cm minimum safety margin to hold the Dabmaster and the atomizer. Don’t use a small bubbler, it is unstable!

-You have to launch your Sublimator once the green light on your regulating device is on.
With a cold Sublimator, you will have to wait up to 10-15 minutes to let it heat until the desired temperature and the thermic balance are reached.

-The heat injector and the bowl (cone / atomizer) have to reach the same temperature via heat conduction.

-Once the thermic balance is reached, use the top handle to lift the heat injector and introduce 0.1grams – 0.15 grams of dry plants in the top part of bowl and make some quick swirls in it with dabber resisting the heat to mix your plants without packing them.

-Replace the Apollo heat injector on the top part of the cone.

-You are not obliged to use water inside the pipe, you can try without it in a first time.

-Take a long and fast/strong inhalation while lifting the bottom handle linked to the cone/atomizer, until your lungs are nearly ready to draw all the vapor from the pipe.

-Wait 30sec between each inhalation to see if you need another one, don’t forget to stir your herbs between each inhalation.

-Always empty the used bowl while it is still hot, a cold bowl is always harder to clean.

-Don’t forget to close the Sublimator once you have finished, you can spin the control button for the electric current until you hear a “click” or you can press on the regulator’s button to shut-off the heat injector Apollo. You must always disconnect the Apollo if you don’t use it.

The Sublimator is a device for medical uses, the metallic parts are becoming extremely hot and can cause heavy burns if you touch them or put them in contact with flammable materials. Use the Sublimator with caution and common sense.

Always remember to turn off and disconnect the Sublimator after using it.

 

We found those useful pieces of advice to start with the Sublimator for Concentrates, this one works like an E-Nail:

-Clean meticulously the bottom section containing the bowl and the atomizer with isopropyl alcohol (ISO) to take off all the possible remaining particles of your new E-Nail.

-Place the screen on the top part of the bowl, which is thinner and looks like a cone, it has to be put at the top of the cone.

-Place the E-nail heat injector at the top of the cone, put those two parts together on the stand of the Sublimator

-You have to launch your Sublimator once the green light on your regulating device is on.
With a cold E-nail, you will have to wait up to 10-12 minutes to let it heat until the desired temperature and the thermic balance are reached.

-The E-nail and the bowl (cone / atomizer) have to reach the same temperature via heat conduction.

-Once the thermic balance is reached, use the top handle to lift the heat injector and introduce the pure concentrates in the top slot of the E-nail

-Replace the heat injector on the top part of the bowl.

-You are not obliged to use water inside the pipe, you can try without it in a first time.

-Take a long and fast/strong inhalation while lifting the bottom handle linked to the cone/atomizer, until your lungs are nearly ready to draw all the vapor from the pipe.

-Wait 30sec between each inhalation to see if you need another one, don’t forget to stir your herbs between each inhalation.

-Always empty the used bowl while it is still hot, a cold bowl is always harder to clean.

-Don’t forget to close the E-nail once you have finished, you can spin the control button for the electric current until you hear a “click” or you can press on the chronometer’s button to turn the E-nail off. You must always disconnect the E-nail if you don’t use it.

The E-nail is a device for medical uses, the metallic parts are becoming extremely hot and can cause heavy burns if you touch them or put them in contact with flammable materials. Use the E-nail with caution and common sense.

Always remember to turn off and disconnect the E-nail after using it.

***Never place a Dabmaster or an E-nail on a hot atomizer because the two parts can melt together. ***

Want to buy / purchase a vaporizer? Got a question before or after buying the vaporizer Sublimator Dabmaster KIT XLR 2.0? Our vape enthusiast team is at your disposal at our service: +331.83.64.69.26 Monday to Friday from 10 a.m. to 6 p.m.

If you want to buy a vaporizer in Paris, our shop of vaporizer and e-cig, is 200 meters away from Voltaire's subway station on the line 9, at 74 rue Sedaine 75011 Paris.

22 other products in the same category: