Accueil > Vaporizer > Portable Vaporizer > VapCap-S Exotic Mouthpiece-Dynavap Vaporizer- Inexpensive Portable Vaporizer

VapCap-S Exotic Mouthpiece-Dynavap Vaporizer- Inexpensive Portable Vaporizer

By buying this product you can collect up to 286 loyalty points. Your cart will total 286 loyalty points that can be converted into a voucher of 2,29 €.


45,83 € tax incl.

New product

The VapCap-S vaporizer from Dynavap vaporizer is the evolution of the VapCap Original vaporizer.

The VapCap-S is provided with one of the XL steel stainless condensers and a rotary wooden mouthpiece.

A torchlighter offered.

Buy a VapCap-S Dynavap vaporizer and receive a carry case as well as a sample of 10 grams of plants (Damania or other offered)

More details

Add to wishlist

Product information sheet

The VapCap-S vaporizer from Dynavap vaporizer is the evolution of the VapCap Original vaporizer.

The VapCap-S is provided with one of the XL steel stainless condenser and a rotary wooden mouthpiece.

VapCap-S of Dynavap Vaporizer is a quite small non-electric portable vaporizer. Like its predecessor and competitor Vaponic, it works with a torch lighter or any other heat source.

The real innovation of Dynavap, present on all the portable vaporizer of the brand Dynavap vaporizer is the control of temperature by sound.

As soon as the evaporation temperature (about 190°C) is reached, the hood- or cape of the vaporizer emits a small click indicating that the heating must be stopped immediately.

A second stronger click informs you that you must stop because the combustion is too close.

As soon as the vaporizer is cold enough for a second heating cycle, a third click goes off. Your Dynavap vaporizer is then ready to be heated again until you hear another click, which indicates that the vaporization temperature is reached and that VapCap no longer needs to be heated. And so on.

Besides, a small hole located on the device, just below the mouthpiece allows you to control the airflow and therefore the thickness of your inhalations.

Finally, its size, and the way you use it make it an inexpensive portable vaporizer, perfect for resins.

The VapCap-S from Dynavap Vaporizer is then an ingenious portable vaporizer and very simple.

Available in several materials.

The VapCap-S from Dynavap vaporizer is the cheapest Dynavap vaporizer.

Made with glass, stainless steel and medical grade silicone, it creates a pure and intense vapor when you feel like it

The flavors and vapor density produced by the VapCar are impressive, its size and its simplicity of use is brilliant.

The flavors and the thickness of your vapor produced by the VapCap is astonishing, its size, weightand its simplicity are absolutely amazing.

To discover, for any vaporizer’s fans that respect themselves and needs a portable vaporizer of quality.

If you only compare the flavor/vapor, the VapCap is worth at least 3 times of the price so if you are looking for an inexpensive vaporizer to begin with or to help you out, the “M” is an excellent choice.

To buy a VapCap Dynavap vaporizer is to receive:

  • 1 VapCap-S vaporizer

  • 1 XL Condenser and its wooden mouthpiece

  • 1 Dynavap transport stem for VapCap-S vaporizer

  • +

  • 1 turbo torch lighter for free

  • 1 packet of 10 grams of Damiania (or other plants according to availability)

  • 1 carry case offered by LaCentraleVapeur


The torch lighter is not supplied, so think about getting one for yourself if you do not already have one.

Do you want to buy a lighter torch/blowtorch of your choice for your portable vaporizer VapCap?

Find all our portable vaporizer lighters here:

If you wish to filter your vapor directly on an adapted bubbler/bong:

Enjoy our special deal when you buy a vaporizer and benefit from a discount of 19 euros on the Bubble Vape LaCentraleVapeur, meaning 20 euros instead of 39 euros.

For this to happen, you have to enter the following code before paying:


Buying a bubbler for your vaporizer allows to moisturize and cool down your vapor which is enjoyable for the temperature above 200°C as well for the throats sensitive to the dry vapor, or cold.

On the picture, the Dynavap vaporizer is assembled on the bubbler with a fat mouthpiece, available here:

Another solution for connecting your Dynavap vaporizer with a bong with a 14mm joint:

-The cheapest solution: Your mouthpiece surrounded by a moist kitchen towel to make a full joint.

Technical data of the VapCap-S Dynavap vaporizer:

  • Glass, medical silicone, Stainless Steel

  • Rare wood from certified forest.

  • Very Small – 92 mm

  • Light = 8.18 grams

  • Heats up in seconds (3 to 5 seconds) with a torch lighter

  • Can be heated with any heat source (candle, ember, bulb etc)

  • Very good Aroma

  • Temperature more or less variable with knowledge.

  • Big puff possible

  • Perfect for micro dosing becauqz the bowl contains 0.15g of dry plants

  • Temperature more or less variable with knowledge., depending on the location of the flame when heated


How to use the VapCap-S Dynavap:

First, we advise you to practice with a vaporizer without any substance.

  • Remove the small metal cap

  • Fill the glass end of VapCap (not the cap – cap) with grinded dry plants or resin

  • Close the cap of the VapCap-S Dynavap Vaporizer

  • Heat the VapCap-S on the side of Metal – cap while turning, until you hear a click

  • WARNING: DO NOT HIT FROM THE TIP!! but only on the side of the cape (see video below)

  • After the click, stop the heater and inhale

  • If you continue to heat it after the first click, a second click will be heard indicating that it is necessary to stop heating it because otherwise the combustion will take place and overheating tends to damage the cape.

  • Before re-starting a warm-up:

  • Wait for a 3rd click (or 30 seconds if you have not heard anything) to let it cool down

  • You can then start heating again until your bowl is completely vaporized.

  • Once your vapor session had finished, let your VapCap cool down, then empty it and start again if necessary

  • To fill and empty the bowl of your VapCap, a simple aspiration and then a simple blow of breath is enough

However, to avoid burning yourself, you need to be careful, so remember to let your VapCap cool down before putting your fingers on it.

How do I clean the VapCap-S Dynavap?

Cleaning this portable vaporizer is quite easy and fast, here is the procedure we recommend:

  • Dismantle your Dynavap vaporizer completely

  • Soak all the pieces in boiling water for 1 minute

  • Take them out, wipe and soak them in a ziplock bag containing with rubbing alcohol for 2min and shake a little

  • Remove them, rinse them with clear water then soak them in a boiling water containing a little cleanser like limpuro (or other ) for 5 min

  • Rinse with clear water

  • So, your VapCap-S vaporiser is brand new, odourless and ready to follow you no matter where you go

Our opinion after testing and reviewing VapCap-S:

  • The VapCap-S is surprisingly very easy to use

  • The Control of temperature by a click sound is very ingenious and allows a complete vapor experience without combustion

  • Its components allows a very good rendering of the aromas plus a complete and rapid extraction of the active ingredients

  • The VapCap-S is already a very good portable vaporizer

  • A ‘must have’ for any enthusiast of steam and especially a very good vaporizer

  • If we only compare the flavor/vapor render is well worth a vaporizer 3 times more expensive, so if you are looking for a small cheap vaporizer to begin with or to help you out, the VapCap is an excellent choice.

Differences between the vaporizer the ‘VapCap Original ‘and the “VapCap-S”:

The VapCap-S from Dynavap is equipped with a XL metal condenser with a wooden mouthpiece, whereas the VapCap Original is equipped of a glass condenser-more fragile- and a medical silicone mouthpiece.

The VapCap-S is then a portable vaporizer that is a little bit more solid and high-end than the VapCap Original.

The VapCap-S is also lighter than the OG.

Differences between the vaporizer the ‘M ‘and the “TI woody” from Dynavap:

All Dynavap portable vaporizer have the same heating element that indicates the temperature by a “click”: The Cap stainless steel.

The difference lies in the body of the VapCap vaporizer, because it’s made of rare wood and interchangeable on the version TI Woody

The “M” stainless steel parts are titanium in the TI Woody (the bowl for example)

Difference between the “M” and the “Omnivap” vaporizer from Dynavap:

All the portable vaporizers from the brand Dynavap are equipped of a heating element which indicates the temperature with a “click”: the stainless steel Cap.

The difference lies in the body of the Omnivap vaporizer, because it’s made of 100% titanium, titanium is lighter, stronger and cool down faster than steel.

Besides, the Omnivap have a adjustable air flow/draw whereas other Dynavap vaporizer like the M or the VapCap Original are equipped with a simple hole to block.

Here is a video presentation of the Original VapCap vaporizer from Dynavap, the VapCap works identically:

Want to buy / purchase a vaporizer? Got a question before or after buying a VapCap-S Exotic mouthpice by Dynavap. Our vape enthusiast team is at your disposal at our service: +331. Monday to Friday from 10 a.m. to 6 p.m.

If you want to buy a vaporizer in Paris, our shop of vaporizer and e-cig, is 200 meters away from Voltaire's subway station on the line 9, at 74 rue Sedaine 75011 Paris.

29 other products in the same category: